Huawei NetEngine40E Hardware Description page 441

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Figure 6-145 Appearance of the 8-Port 10GBase LAN/WAN-XFP Integrated Line Processing
Unit
Panel
Figure
Line Processing Unit.
Figure 6-146 Panel appearance of the 8-Port 10GBase LAN/WAN-XFP Integrated Line
Processing Unit
Table 6-398 Indicators on the panel of the 8-Port 10GBase LAN/WAN-XFP Integrated Line
Processing Unit
Component
OFL button
OFL indicator
(red)
RUN indicator
(green)
L/A (green)
Issue 01 (2012-09-30)
The 8-Port 10GBase LAN/WAN-XFP Integrated Line Processing Unit supports the oversubscription
mode. The left-most four ports can be converged to 20 Gbit/s in average. The right-most four ports can
be converged to 20 Gbit/s in average.
6-146shows the panel appearance of the 8-Port 10GBase LAN/WAN-XFP Integrated
Table 6-398
Description
It is a button indicating the removal of a board. Before removing a
board, you need to press and hold the OFL button for about five
seconds till the OFL indicator is on.
If the indicator is on, you can remove the board.
If the indicator blinks once every 2s (0.5 Hz), the LPU is in the normal
state.
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
describes the indicators on the panel.
6 Boards
427