D Optical Module; Instructions On How To Use An Optical Module - Huawei NetEngine40E Hardware Description

Hide thumbs Also See for NetEngine40E:

Table of Contents

HUAWEI NetEngine40E Universal ServiceRouter

Hardware Description

This chapter presents the optical module.

D.1 Instructions on How to Use an Optical Module

D.2 155 Mbit/s SFP/eSFP Optical Module

D.3 622 Mbit/s eSFP Optical Module

D.4 1 Gbit/s Electrical Transceiver

D.5 1.25 Gbit/s SFP/eSFP Optical Module

D.6 2.5 Gbit/s SFP/eSFP Optical Module

D.7 10 Gbit/s XFP Optical Module

D.8 10 Gbit/s XFP CWDM Optical Module

D.9 10-Gbit/s SFP+ Optical Module

D.10 10 Gbit/s SFP+ CWDM Optical Module

D.11 155 Mbit/s CSFP Optical Module

D.12 1.25 Gbit/s CSFP Optical Module

D.13 40Gbps TRANSPONDER Optical Modules

D.14 40Gbps CFP Optical Modules

D.15 100Gbps CFP Optical Modules

D.1 Instructions on How to Use an Optical Module

Precautions for the loosened optical module

Issue 01 (2012-09-30)

Use only the modules supplied by HUAWEI.We cannot guarantee that the interface module will operate

correctly if third-party transceivers are used.

When installing an optical module, force it into position. If a crack sound is heard or a

slight tremor is felt, it indicates that the latch boss is secured. When the latch boss is not

secured, the connecting finger is unstably connected to the connector on the board, and

the link may become Up. On the condition that the optical module tremors or collides

Huawei Proprietary and Confidential

Optical Module

D Optical Module