Huawei NetEngine40E Hardware Description page 450

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Figure 6-150 Panel appearance of the 48-port 100/1000Base-X SFP Integrated Line Processing
Unit
Table 6-410 Indicators on the panel of the 48-port 100/1000Base-X SFP Integrated Line
Processing Unit
Component
OFL button
OFL indicator
(red)
RUN (green)
L/A
indicator(green)
Interface Attributes
Table 6-411
Processing Unit.
Table 6-411 Interface attributes of the 48-port 100/1000Base-X SFP Integrated Line Processing
Unit
Attributes
Connector type
Optical interface
attributes
Working mode
Frame format
Network protocol
Issue 01 (2012-09-30)
Description
It is an OFL button. Before removing a board, press the OFL button.
Hold the button for five seconds till the OFL indicator is on. Then, the
board can be pulled out.
If the indicator is steady on, it indicates that you can remove the
board.
If the indicator blinks once every 2s (0.5 Hz), it indicates that the
system is running normally. If the indicator blinks twice every 1s (2
Hz), it indicates that the system is in the alarm state.
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.
lists the interface attributes of the 48-port 100/1000Base-X SFP Integrated Line
Description
LC/PC
Compliant with the selected SFP optical module.
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Boards
436