Huawei NetEngine40E Hardware Description page 543

Hide thumbs Also See for NetEngine40E:

Table of Contents

HUAWEI NetEngine40E Universal ServiceRouter

Hardware Description

Figure 6-193 Panel appearance of the 12-port 10/100/1000Base-RJ45 FPIC

Table 6-550 Indicators on the panel of the 12-port 10/100/1000Base-RJ45 FPIC

indicator (green)

indicator (yellow)

Interface Attributes

Table 6-551 Interface attributes of the 12-port 10/100/1000Base-RJ45 FPIC

Connector type

Working mode

Cable specification

Frame format

Issue 01 (2012-09-30)

If the indicator blinks once every 2s (0.5 Hz), the FPIC is in the

normal state state. If the indicator blinks twice every 1s (2 Hz), the

FPIC is in the alarm state.

If the indicator is on, the link is Up. If the indicator is blinking, the

data is being read or written. If the indicator is off, the link is Down.

lists the interface attributes of the 12-port 10/100/1000Base-RJ45 FPIC.

10M/100M/1000M auto-sensing and half-duplex and full-duplex

Category 5 unshielded twisted pair (UTP) cable recommended when

the interface works at 10 Mbit/s or 100 Mbit/s; super category 5

Shielded Twisted Pair (STP) cable recommended when the interface

works at 1000 Mbit/s..

Ethernet_II, Ethernet_SAP, and Ethernet_SNAP

Huawei Proprietary and Confidential