Huawei NetEngine40E Hardware Description page 540

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Indicator
LINK/ACT
indicator
Interface Attributes
Table 6-546
Table 6-546 Interface attributes of the 10-port 1000Base-X-SFP Flexible Card E
Attributes
Connector type
Optical interface
attributes
Working mode
Compliant
standard
Frame format
Network protocol
Table 6-547 Attributes of 1000M SFP optical modules
Attributes
Maximum
transmission
distance
Center
wavelength
Minimum
transmitting
power
Maximum
transmitting
power
Receiving
sensitivity
Overload optical
power
Issue 01 (2012-09-30)
Description
FPIC is in the alarm state.
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.
lists the interface attributes of the 10-port 1000Base-X-SFP Flexible Card E.
Description
LC/PC
Compliant with the selected SFP optical module
Full-duplex
IEEE 802.3-2002
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
0.5 km 10 km
( 0.31 ( 6.21
mi. ) mi. )
850 nm 1310 nm
-9.5 dBm -9.5 dBm
-2.5 dBm -3.0 dBm
-17.0 -20.0
dBm dBm
0 dBm -3.0 dBm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
40 km 40 km
( 24.86 ( 24.86
mi. ) mi. )
1310 nm 1550 nm
-4.5 dBm -4.0 dBm
3.0 dBm 1.0 dBm
-22.5 -21.0
dBm dBm
-3.0 dBm -3.0 dBm
6 Boards
80 km 100 km
( 49.71 ( 62.14
mi. ) mi. )
1550 1550 nm
nm
-2.0
0 dBm
dBm
5.0 5.0 dBm
dBm
-23.0 -30.0
dBm dBm
-3.0
-9.0 dBm
dBm
526