Remote Start/Stop; Communication Start/Stop - EBARA ESA25-D Instruction Manual

7.2.2 REMOTE Start/Stop

a) START
Enter the external "MP" start signal input from the control connector.
The MP starts.
The power is indicated on the display during pump operation. For other
status display indications, refer to Table 6.1.
[ NOTE ]
generated. When a START signal is entered, "STARTFAIL" will
appear on the display.
b) STOP
Interrupt the external MP start signal and the pump will stop.

7.2.3 COMMUNICATION Start/Stop

a) START
Enter the external "MP" start command input from the control connector.
The MP starts.
The power is indicated on the display during pump operation. For other
status display indications, refer to Table 6.1.
[ NOTE ]
generated. When a START signal is entered, "STARTFAIL" will
appear on the display.
b) STOP
Interrupt the external MP start command and the pump will stop.
*Please refer to the COMMUNICATION SPCIFICATIONS in detail.
PM10U
The pump will not start when a WARNING/ALARM has been
The pump will not start when a WARNING/ALARM has been
P.51
EBARA
CORPORATION