Remote Start/Stop - EBARA ESA500W Instruction Manual

P.46

7.2.2 REMOTE Start/Stop

a) START
Enter the external "MP" start signal input from the control connector.
The MP starts.
In the automatic BP operating mode, the BP can be started/stopped
automatically.
When the BP is operated under external start signal input, apply the external
BP start signal to the control connector.
The current is indicated on the display during pump operation. For other
status display indications, refer to Table 6.1.
[ NOTE ]
generated. When a START signal is entered, "STARTFAIL" will
appear on the display.
b) STOP
Interrupt the external MP start signal and the pump will stop.
PM10U
The pump will not start when a WARNING/ALARM has been
EBARA
CORPORATION