Table 3-6 Emulation Modes For The Library - Tandberg Data Magnum 224 Product Manual

6. 6. 6. 6.
C
By default, the library operates in Native emulation mode and returns the
product identification, "EXABYTE ", "MAGNUM 224
INQUIRY command from an application.
If your library software has not yet been certified for the Magnum 224,
StorageLibrary T24, or StorageLoader 2U LTO, you can select an option in
Table
Note:

Table 3-6 Emulation modes for the library

Because most backup applications are certified for one or more of these
libraries, changing the emulation mode may allow these applications to
support the library.
To change the emulation mode:
1. 1. 1. 1.
A 2007
UGUST
Press Back (as needed) to return to the Home screen.
E
HANGING THE MULATION
3-6, which lists the available emulation modes for the library.
If you change the emulation mode, you will need to reboot your host
computer so that it recognizes the new emulation mode.
Emulation Mode Returns this Product Identification in response to an
INQUIRY command
Native The default Product Identification stored in the library's
microcode.
Exabyte 221L "Exabyte_221L" where each "_" represents an ASCII space
character.
Exabyte EZ17 "Exabyte_EZ17_ _ _ _" where each "_" represents an ASCII
space character.
Exabyte 210 "EXB-210_ _ _ _ _ _ _ _ _" where each "_" represents an
ASCII space character.
At the Home screen, press Lib.
If necessary, enter the operator panel password (see
M
AGNUM
S
ETTING
M
ODE
224, S L T24,
TORAGE IBRARY OR
C O
ONFIGURATION PTIONS
" in response to a SCSI
page 75).
S L 2U
TORAGE OADER
53