Tandberg Data Magnum 224 Product Manual page 149

U
Set up automatic tape drive cleaning during library configuration, and store a
cleaning cartridge in the library. See
automatic tape drive cleaning.
U
Set the cleaning option in your backup application (if available) so that the
software monitors tape drive cleaning requirements and automatically cleans
the tape drive(s) using a cleaning cartridge stored in the library. Refer to your
software documentation for information about setting this option.
C
Use the front panel Clean Drive option to clean the tape drive(s) when the
library or backup application notifies you to do so. When you select the Clean
Drive option, the library loads the cleaning cartridge into the tape drive, waits
until the cleaning is finished, unloads the cleaning cartridge, returns it to its
cell, and resumes normal operation.
Before using the Clean Drive option, make sure that you have turned the Auto
Cleaning option OFF (see
A 2007
UGUST
L ' A
SE THE IBRARY S UTOCLEAN
If the fixed The library...
cleaning slot is...
Enabled attempts to load a cleaning cartridge from the fixed
cleaning cell
Disabled looks for a cleaning cartridge in the I/E port
Once the cleaning cycle is complete, the cartridge
will be returned to its original element (fixed cell or
I/E port)
B A
SE YOUR ACKUP PPLICATION
T D
LEANING A APE RIVE
M
AGNUM
F
UNCTION
page 59 for information about setting up
' C
S LEANING
U C
SING THE LEAN
page 61).
224, S L T24,
TORAGE IBRARY OR
C T
LEANING THE APE
O
PTION
D O
RIVE PTION
S L 2U
TORAGE OADER
131
D
RIVE