Tandberg Data Magnum 224 Product Manual page 76

C 3—C
HAPTER ONFIGURING THE
Setting the Restart Option
The Restart option determines what the library does after it is reset, power
cycled, or when a magazine has been re-inserted.
Setting the Loop Option
The Loop option determines what the library does after it has finished
processing the last cartridge in the sequence.
P M
RODUCT ANUAL
58
L
IBRARY
Setting The library...
Enabled restarts at the beginning of the cartridge sequence
Disabled resume where it left off when the interruption occurred
a. a. a. a. At the Restart screen, press
Restart
> Enable
Disable
–
b. b. b. b. Press Select, and then continue with
Setting The library...
Enabled loops back to the first cartridge in the sequence and begins
processing the cartridges again
Disabled stops and waits for operator intervention.
You need to set the library to operate in Random mode,
and then reset it to Sequential mode
a. a. a. a. At the Loop screen, press
Loop
Enable
> Disable
–
b. b. b. b. Press Select.
+ –
or to select Enable or Disable.
+
Select Back
Setting the Loop
+ –
or to select Enable or Disable.
+
Select Back
Option.
1017472