Tandberg Data Magnum 224 Product Manual page 150

C 5—O
HAPTER PERATING THE
The Clean Drive option allows you to select any slot/cell as the source for a
cleaning cartridge, including an I/E Port. Determine the location of your
cleaning cartridge, and then proceed.
Cleaning
Cartridge
Not stored in
library
Stored in
library
When a tape drive requires cleaning:
1. 1. 1. 1.
2. 2. 2. 2.
P M
RODUCT ANUAL
132
L
IBRARY
Condition
Cells all occupied
Cells not all occupied
I/E Port enabled
I/E Port disabled
At the Home screen, press Maint.
If necessary, enter the operator panel password (see
Press until the selection arrow (
Maintenance
Library Maintenance
Drive Maintenance
Cleaning Options
System Reset
USB Options
Description
Use the Export command to remove a
cartridge from the library, as described
on page 122. Before closing the I/E Port
door, insert the cleaning cartridge.
Load the cleaning cartridge into an
enabled I/E Port, and then select it as
the "source" in Step 4 below.
Store in Slot/Cell 2
Store in Slot/Cell 1
page 75).
) points to Cleaning Options.
Select Back
1017472