C
4—U
R
HAPTER
SING THE
EMOTE
SCSI Bridge If you have two tape drives installed in the library, you can
assign one of them to act as the primary SCSI interface (bridge) for the library.
If you have only one tape drive installed, it automatically acts as the SCSI
bridge.
P
M
RODUCT
ANUAL
92
M
U
ANAGEMENT
TILITY
Notes:
The library communicates with the host through the SCSI interface of
the tape drive(s) via the ADI serial interface. The SCSI interface as
seen by the host is the SCSI interface of the tape drive. The library is
shown as LUN 1 of the tape drive's SCSI ID.
For additional information, see:
The tape drive's Product Manual for tape drive information.
Automation/Drive Interface - Command (ADC) for ADI information.
SCSI configuration—to change the SCSI bridge assignment, click the
radio button to the right of the tape drive and click Update.
Fibre Channel configuration—to change the SCSI bridge assignment,
click the radio button to the right of the tape drive and click Update.
1017472