Tandberg Data Magnum 224 Product Manual page 131

After you have configured your library, you can add cartridges and put it into
operation. You can operate the library in either Random or Sequential mode.


! ! ! !
During normal operation, you do not need to intervene in library activities.
However, you may occasionally need to perform the following tasks,
described in this chapter.
A 2007
UGUST
O
PERATING THE
Random mode (the default)—The library processes cartridges according to
commands issued from an application.
Sequential mode—The library automatically processes the cartridges in
sequential order. See
operate in Sequential mode.
If you are using a backup application which is capable of
Important
controlling the library, do not configure the library to operate
in Sequential mode.
To view this information...
Preparing cartridges
Inserting and moving cartridges
Loading cartridges into a magazine
Removing cartridges from the library
Issuing a Re-inventory command to the library
Loading and unloading cartridges from the tape drive(s)
Cleaning the tape drive(s)
Resetting the library
Storing cartridges that you have removed from the library
M
AGNUM
5
page 55 for instructions on how to set the library to
224, S L T24,
TORAGE IBRARY
L
IBRARY
go to...
page 115
page 116
page 120
page 122
page 124
page 125
page 128
page 134
page 136
S L 2U
OR TORAGE OADER
113