Tandberg Data Magnum 224 Product Manual page 171

V U
IEWING AND PDATING THE
The library maintains a cartridge inventory to keep track of where cartridges
are located. In performing an inventory, the library checks for cartridges in the
cells and scans each cartridge's bar code label. The library uses this
information to process commands from an application.
Note:
V
A cartridge inventory is automatically performed each time the library is
powered on, each time a cartridge is inserted or removed from the library, and
each time a magazine is inserted into the library. You can view the cartridge
inventory to quickly determine which cells contain cartridges and whether a
cartridge is loaded in a tape drive.
Magazine inventory (slots)
To view the magazine inventory:
1. 1. 1. 1.
2. 2. 2. 2.
3. 3. 3. 3.
A 2007
UGUST
C
ARTRIDGE
Both the Magnum 224 and the StorageLibrary T24 are 24-slot libraries; the
StorageLoader 2U LTO library is a 20-slot library.
C I
IEWING ARTRIDGE
At the Home screen, press Lib.
If necessary, enter the operator panel password (see
Press until the selection arrow (
Library
Library ID
Inventory
Password
Select Language
Library Settings
Press Select.
M
AGNUM
V U
IEWING AND PDATING THE
I
NVENTORY
NVENTORY
) points to Inventory.
Select
224, S L T24,
TORAGE IBRARY
C I
ARTRIDGE NVENTORY
page 75).
Back
S L 2U
OR TORAGE OADER
153