Tandberg Data Magnum 224 Product Manual page 78

C 3—C
HAPTER ONFIGURING THE
Activating the Cleaning Cartridge Cell
Activating the cleaning cartridge cell designates the storage location for a
cleaning cartridge. Use one of the following options:
Note:
To activate the cleaning cartridge cell:
1. 1. 1. 1.
2. 2. 2. 2.
3. 3. 3. 3.
4. 4. 4. 4.
P M
RODUCT ANUAL
60
L
IBRARY

Slot/Cell 2—if the I/E Port is enabled

Slot/Cell 1—if the bottom I/E Port is disabled
The library ships from the factory with the I/E Port enabled. In order to use
that slot/cell as the fixed cleaning slot, you need to disable it. See
and Disabling the I/E Port" on page
At the Home screen, press Maint.
If necessary, enter the operator panel password (see
Press until the selection arrow (
Maintenance
Library Maintenance
Drive Maintenance
Cleaning Options
System Reset
USB Options
Press Select.
Press or until the selection arrow (
Cleaning Options
Clean Drive
Fixed Cleaning Slot
Auto Cleaning
Cleaning Tape
45.
page 75).
) points to Cleaning Options.
Select Back
) points to Fixed Cleaning Slot.
Select Back
"Enabling
1017472