Tandberg Data Magnum 224 Product Manual page 111



Panel – If desired, you can use the Remote Management utility to change the
password that protects access to the library's menus from the front panel.
To set or change this password:
1. 1. 1. 1.
2. 2. 2. 2.
3. 3. 3. 3.
To cancel an existing password, enter the current password in the "Current
Access Password" field and leave the "New Front Panel Access Password" and
"Confirm New Access Password" fields blank.
A 2007
UGUST
Once you click the Update button and you receive the following
confirmation message, you need to reset the library.
See "Advanced" on page 111
See "Tape Drive SCSI Interface (Library Bridge)" on page 50
bridge from the front panel.
Enter a new password in the "New Front Panel Access Password" field. See
page 73 for more information about password protecting the front panel
menus, including length restrictions.
Re-enter the new password in the "Confirm New Access Password" field.
If you are changing an existing password, enter the current password in
the "Current Access Password" field.
M
AGNUM
S
ETTING
for instructions on how to reset the library.
224, S L T24,
TORAGE IBRARY OR
C O
ONFIGURATION PTIONS
to set the SCSI
S L 2U
TORAGE OADER
93