E
You can enable the library to identify the 'type' of media installed in the library
when it scans barcodes. With this option enabled, the bar code scan includes
two extra digits: L2 for an LTO-2 data cartridge, L3 for an LTO-3 data
cartridge, or L4 for an LTO-4 data cartridge.
Note:
To enable or disable the media identifier:
1. 1. 1. 1.
2. 2. 2. 2.
A
2007
UGUST
M
NABLING THE
EDIA
Setting
The scan provides information similar to this...
Enabled
A000001L4
Disabled
A000001
The library scans the bar code label, not the cartridge. Ensure that you affix
the correct label type to the cartridges: LTO-2 labels for LTO-2 cartridges,
LTO-3 labels for LTO-3 cartridges, and LTO-4 labels for LTO-4 cartridges.
At the Home screen, press Lib.
If necessary, enter the operator panel password (see
Press
until the selection arrow (
press Select.
Library
Library ID
Inventory
Password
Select Language
Library Settings
M
AGNUM
S
I
DENTIFIER
) points to Library Settings, and then
Select
224, S
L
T24,
TORAGE
IBRARY
C
O
ETTING
ONFIGURATION
page
75).
Back
S
L
2U
OR
TORAGE
OADER
PTIONS
47