Tandberg Data Magnum 224 Product Manual page 84

C 3—C
HAPTER ONFIGURING THE
3. 3. 3. 3.
! ! ! !
4. 4. 4. 4.
5. 5. 5. 5.
Changing the IP Address
1. 1. 1. 1.
2. 2. 2. 2.
3. 3. 3. 3.
4. 4. 4. 4.
P M
RODUCT ANUAL
66
L
IBRARY
+
Press Modify. Press
Disabling DHCP addressing (assigned by the server) enables Static
addressing (a fixed IP address).
Dynamic assignment of the library's IP address may require
Important
periodic reinstallation or reconfiguration of some monitoring
software applications.
Press Select.
Press OK.
To change the IP address, press
IP Address.
Ethernet
DHCP
IP Address
Subnet Mask
Gateway
MAC Address
Press Select.
Ethernet
IP Address:
000.000.000.000
+
Press Modify. Press
+
Note: Press the
to cycle through all the number choices.
Press to move to the next number.
Repeat steps 4 and 5 to change the remaining values in the address.
–
or to toggle between Enable and Disable.
until the selection arrow (
Select
Modify
to increase the value.
) points to
Back
OK
1017472