Tandberg Data Magnum 224 Product Manual page 147


Do not use any cleaning method other than the LTO Cleaning Cartridge. Using
Caution
other cleaning methods will void your warranty.
Carefully follow all instructions and recommendations provided with the cleaning
cartridge. Do not rewind and reuse the material in a cleaning cartridge. Reusing
the material may redistribute contaminants previously removed from the tape
path. If all of the cleaning material has been used, discard the cartridge and use a
new cleaning cartridge.
You can clean the tape drive(s) in several ways:
C
Before cleaning the tape drive, verify that the cleaning cartridge in the library
is not depleted.
Notes:
To view the status of the cleaning cartridge after it has been used:
1. 1. 1. 1.
A 2007
UGUST
Auto cleaning enabled—The library does not display this message if Auto
Cleaning is enabled and a cleaning cartridge is in the fixed cleaning cell. In
this case, the cleaning is done automatically (see
Drive Cleaning" on page
To view this information...
Use the library's Autoclean function
Use your backup application's cleaning option
Use the front panel Clean Drive option
C
HECK THE LEANING
The cleaning count information is stored in the cartridge, so it must be
used once to "start" the count. Until it is used the first time, the library
displays an "unknown" (Remote Management Utility) or "no data
available" (front panel) status.
If there is no barcode label on the cleaning cartridge, a power cycle causes
the cleaning count information to be lost. If there is a barcode label on the
cleaning cartridge, the library stores the information and recognizes it after
a power cycle.
At the Home screen, press Maint.
If necessary, enter the operator panel password (see
M
AGNUM
59).
C S
ARTRIDGE TATUS
224, S L T24,
TORAGE IBRARY OR
C T D
LEANING THE APE
"Setting Up Automatic Tape
go to...
page 131
page 75).
S L 2U
TORAGE OADER
129
RIVE