C
3—C
HAPTER
ONFIGURING THE
2. 2. 2. 2.
3. 3. 3. 3.
4. 4. 4. 4.
5. 5. 5. 5.
6. 6. 6. 6.
Changing the Contrast
The contrast setting changes the contrast of the Liquid Crystals. Too high a
value will "wash out" the display, and too low a value will cause darkness and
streaking.
To change the LCD contrast:
1. 1. 1. 1.
2. 2. 2. 2.
3. 3. 3. 3.
P
M
RODUCT
ANUAL
40
L
IBRARY
Press Select.
+
Press Modify. Press
or
As you change the value, the display will update to show the result of the
current value.
Press Select to accept the change, or Back to restore the previous value.
Press OK to continue.
Press Back (as needed) to return to the Home screen.
At the Home screen, press Lib.
If necessary, enter the operator panel password (see
Press
until the selection arrow (
Library
Library ID
Inventory
Password
Select Language
Library Settings
Press Select.
–
until the selection changes to the desired value.
) points to Library Settings.
Select
Back
page
75).
1017472