Tandberg Data Magnum 224 Product Manual page 172

C 6—V L
HAPTER IEWING IBRARY
4. 4. 4. 4.
5. 5. 5. 5.
6. 6. 6. 6.
7. 7. 7. 7.
P M
RODUCT ANUAL
154
I
NFORMATION
Press until the selection arrow (
Inventory
View Slots
View Drives
View I/E Ports
Re-Inventory
Press Select.
View Slots:
Address: 0001
Slot: 8: (empty)
–
Notes: The slot/cell count changes depending on whether you have the I/E
Port and the fixed cleaning slot enabled or disabled. If there is no
cartridge in the slot/cell that you are viewing, the library indicates an
(empty) status.
If you enabled the Media Identifier (see
Identifier" on page
(LTO-3, LTO-4, and so forth). The library scans the bar code label, not
the cartridge, so if you affix an LTO-3 bar code label to an LTO-4 data
cartridge, it displays as an LTO-3 cartridge.
The above screen shows either a Magnum 224 or a StorageLibrary
T24. The last two slots in StorageLoader 2U LTO library are not
shown.
+ –
Press or to move between the slots.
This moves the cursor to the next (or previous) occupied slot and shows the
slot number and the barcode number (if there is a cartridge and it has a
barcode). The library skips slots that do not contain a cartridge.
Press Back (as needed) to return to the Home screen.
) points to View Slots.
Select Back
+
Back
"Enabling the Media
47), the library also displays the type of cartridge
1017472