C
3—C
HAPTER
ONFIGURING THE
In Sequential mode, magazines are automatically associated with tape drives
so that each tape drive and its associated magazine (or magazines) becomes an
independent autoloader.
! ! ! !
Random is the default operating mode for the library. To change the operating
mode to Sequential, you need to enable the Sequential Mode, and set the
Restart and Loop options.
1. 1. 1. 1.
2. 2. 2. 2.
3. 3. 3. 3.
4. 4. 4. 4.
P
M
RODUCT
ANUAL
56
L
IBRARY
Sequential–The library processes cartridges sequentially without direction
from an application.
If you are using a backup application which is capable of
Important
controlling the library, do not configure the library to operate
in Sequential mode.
At the Home screen, press Lib.
If necessary, enter the operator panel password (see
Press
until the selection arrow (
Library
Library ID
Inventory
Password
Select Language
Library Settings
Press Select.
Press
until the selection arrow (
Library Settings
Operation Mode
X
Ethernet
Display Settings
Storage Settings
Restore Defaults
page
75).
) points to Library Settings.
Select
Back
) points to Operation Mode.
Select
Back
1017472