Tandberg Data Magnum 224 Product Manual page 155

The library maintains an internal database containing extensive information
about its configuration and operations. This information is available through
the front panel. During day-to-day operation, you typically do not need to
access this information. However, if you need to contact Tandberg Data
Technical Support about your library, you may be asked to check and report
back on various settings and event results.
This chapter explains how to view the following information.
V B L
IEWING ASIC IBRARY
Because the library communicates with the host through the SCSI interface of
the tape drive(s) via the ADI serial interface, the SCSI interface seen by the
host is the SCSI interface (SCSI ID) of the tape drive.
A 2007
UGUST
To view this information...
Library information – library type, serial number, and SCSI ID
Library status – fans, cable, and temperature
Library history – event logs
Library statistics – view slots, drives, and I/E port
Library settings – emulation mode, operation mode, ethernet,
I/E port, and the display and storage settings
Tape drive information –
ƒ SCSI tape drive–serial number, SCSI ID, and type, and the
tape drive designated as the SCSI interface (bridge)
ƒ FC tape drive–NPort Address, Loop ID, Port number, and
WWNN number
Cartridge inventory
I
NFORMATION
M
AGNUM
6
V
IEWING
I
NFORMATION
224, S L T24,
TORAGE IBRARY OR
L
IBRARY
go to...
below
page 139
page 140
page 143
page 146
page 148
page 153
S L 2U
TORAGE OADER
137