Tandberg Data Magnum 224 Product Manual page 122

C 4—U R
HAPTER SING THE EMOTE
After you successfully park the robot (front panel confirmation message: Park
for Shipping Good), replace the shipping lock prior to moving the library (see
"Replacing the Shipping Locks" on page
Ship Lock Type If your library arrived with a red ship lock installed (see
Figure 2-10 on page
shipped with an older version of ship lock, use this option to configure your
library for the correct lock.
Lib CUP Library Code Update – Use this option to update the code in the
library. The following figure shows the options for updating the library's code.
! ! ! !
Do not attempt to perform library operations or power down the library until after
Caution
it automatically resets.
P M
RODUCT ANUAL
104
M U
ANAGEMENT TILITY
22), you do not need to change this option. If your library
Make sure that you select and download the correct firmware
Important
files. Firmware for other Tandberg Data products is not
compatible with the Magnum 224, StorageLibrary T24, or
StorageLoader 2U LTO.
230).
1017472