Tandberg Data Magnum 224 Product Manual page 63

9. 9. 9. 9.
10. 10. 10. 10.
! ! ! !
E
The library ships from the factory with the I/E port enabled. Use these
instructions to disable the I/E port, or to enable it if it was previously disabled.
! ! ! !
To enable or disable the I/E port:
1. 1. 1. 1.
2. 2. 2. 2.
3. 3. 3. 3.
A 2007
UGUST
Press OK to continue.
Press Back (as needed) to return to the Home screen.
You may need to reconfigure your backup application to
Important
recognize the new slot count. Refer to your application's
documentation for instructions.
D
NABLING AND ISABLING THE
Setting Description
Enabled Use the I/E port to import and export cartridges without
removing an entire magazine
Disabled Gain one more cartridge storage slot/cell
Changing the I/E Port setting always disables the Fixed Cleaning
Important
Slot. If you wish to use the Fixed Cleaning Slot, it must be
enabled after selecting the I/E Port Option.
See "Activating the Cleaning Cartridge Cell" on page 60
additional information.
At the Home screen, press Lib.
If necessary, enter the operator panel password (see
Press until the selection arrow (
Library
Library ID
Inventory
Password
Select Language
Library Settings
Press Select.
M
AGNUM
S
ETTING
I/E P
ORT
) points to Library Settings.
Select
224, S L T24,
TORAGE IBRARY OR
C O
ONFIGURATION PTIONS
for
page 75).
Back
S L 2U
TORAGE OADER
45