Tandberg Data Magnum 224 Product Manual page 93

8. 8. 8. 8.
9. 9. 9. 9.
When password protection is in effect, you must enter the password before
you can use the operator panel menus. Each time you return to the Home
screen and press a different button, password protection is re-activated; you
must enter the password again to access the menus.
Accessing password protected operator panel menus
If you need to gain access to the operator panel menus, but want password
protection to remain in effect, follow these steps:
1. 1. 1. 1.
2. 2. 2. 2.
A 2007
UGUST
This screen shows an example of a password using upper and lower case
letters and numbers.
Password
CATinHAT123
Press Done to accept the change, or press Back to reject the change.
Once you enable the password, a padlock icon appears in the upper right
screen to show that the operator panel is password protected.
TANDBERG DATA
Lib : Idle
D-2 : No Tape
D-1 : No Tape
Move
Press Back (as needed) to return to the Home screen.
At the Home screen, press the mode you need to access. The following
screen appears.
Confirm Password
AAA
Enter the operator panel password by following the steps on
M
AGNUM
S
ETTING
+
Done
Lib Maint Drive
+
Done
224, S L T24,
TORAGE IBRARY OR
C O
ONFIGURATION PTIONS
Back
Back
page 74.
S L 2U
TORAGE OADER
75