Tandberg Data Magnum 224 Product Manual page 92

C 3—C
HAPTER ONFIGURING THE
4. 4. 4. 4.
5. 5. 5. 5.
6. 6. 6. 6.
7. 7. 7. 7.
P M
RODUCT ANUAL
74
L
IBRARY
+
Press Modify. Press or
Password
> Enable
Disable
–
With the arrow pointed to Enable, press Select.
Note: The password can be between 3 and 11 characters long and consists
of upper case alphabet letters ("A" to "Z"), lower case alphabet letters
("a" to "z"), and numbers ("0" to "9").
Characters increment as follows:
First Second
(upper case (lower case
letters) letters)
"A" to "Z" "a" to "z"
The blank allows you to truncate the password at the current letter and will
remove all characters beyond that point. If you continue to press"
characters will begin again at "A" (upper case A).
Password
AAA
+
Press to increase the letter (the library starts at "A").
Press ( ) to move to the next field and repeat step 8.
Pressing the ( ) button scrolls the cursor through the current letters of the
password, including an extra "blank" character at the end, which allows
you to add to the length of the password. Scrolling beyond the end of the
password causes the cursor to wrap to the first character of the password.
–
to switch between Enable and Disable.
+
Select Back
Third Last
(numbers) (blank space)
(if the cursor is beyond the
third character)
"0" to "9" " "
+
Done Back
+
", the
1017472