Front Panel Lcd Menu Operations; System Settings Menu - Lightware MX2-8x8-DH-4DPio-A User Manual

   
3. Front Panel Control
3.2. Front Panel LCD Menu Operations
The company logo is displayed on the screen during the boot-up. The main menu is
displayed after about 30 seconds, and the device is ready to use.
Menu Structure
The front panel has a color LCD that shows the most important settings and parameters
structured in a menu. The jog dial control knob can be used to navigate between the menu items or change
the value of a parameter. The knob can be pressed to enter a menu or edit/set a parameter.
MX2 Standalone Matrix Switcher series – User's Manual
Parameter Selection
The blue
one means the current setting.
TIPS AND TRICKS:

parameter list is scrolled.
Enter the menu/ submenu
Icon before the line indicates the additional submenus. Click with the

rotary to enter.
Blue dot shows that there is no submenu or setting possibility.
3.2.1. System Settings Menu
Network Submenu
The parameters of the network connection can be set in this submenu.
The first three lines (IP, Subnet, and Gateway parameters) show the
current settings. If the DHCP option is disabled, three more parameters
are listed that can be set for a static IP address:
▪
▪
▪

ATTENTION!
Save option under Network menu (not only in the submenu of the
parameter) to apply the new settings.
#dhcp
Network security feature can be enabled or disabled in this submenu.
Applied firmware package: v1.9.0 | LDC software: v2.6.2b3
colored line means the selected menu/parameter, the
The faster you rotate the jog dial, the faster the
Static IP,
Static Subnet,
Static Gateway.
If you change the network settings, always press the
#network
23
green
#ipaddress