Querying The Firmware Of All Controllers; Querying The Lan Versions; Querying The Health Status; Querying The Error List - Lightware MX-FR Series User Manual

   
7. Programmer's Reference
7.5.8. Querying the Firmware of All Controllers'
Description: Shows the firmware versions of all installed controllers. The number of responses depends on
the router configuration.
Format
Command {FC}
Response (CF●<DDSC>)CrLf
(CF●<DDSC>)CrLf
...
(CF DND)CrLf
Explanation: The matrix has an MX-CPU2 processor. There is a control panel in the frame.
7.5.9. Querying the LAN Versions
Description: Shows information about the LAN interface.
Format
Command {LAN_VDR=?}
Response (MAC_ADDR=<mac>)CrLf
(WEB_VER=<ver1>)CrLf
(SDRVDR_VDR=<ver2>)CrLf
Legend:
Identifier
<mac> MAC address of LAN controller in the matrix.
<ver1> Version of built-in website user interface (webcontent).
<ver2> Version of LAN controller firmware (webserver).
Explanation: MAC address, webcontent and webserver versions are shown.
7.5.10. Querying the Health Status
Description: Queries the health status. The response depends on the frame type.
Format
Command {ST}
Response (ST●<DDSC>)CrLf
...
(ST●<DDSC>)CrLf
Explanation: Internal voltages, temperature and fan speeds shown.
MX-FR Series Modular Matrix Frames – User's Manual
Example
→ {fc}
(CF MX-CPU2 FW:3.4.9r SCH_2.2)CrLf
←
(CF MX-CP FW:1.0.8 @ 0x10)CrLf
←
...
← (CF DND) CrLf
Example
→ {lan_ver=?}
← (MAC_ADDR=00-20-4A-C7-AC-C0)CrLf
← (WEB_VER=1.7.2)CrLf
← (SDRVDR_VDR=4.0.0)CrLf
Explanation
Example
→ {st}
← ST CPU 3.32V 5.03V 3.05V 5.03V
12.11V 31.6C)CrLf
(ST FAN#1 1530RPM)CrLf
←
(ST FAN#2 1530RPM)CrLf
←
7.5.11. Querying the Error List
Description: Shows the basic error list since last boot up.
Format
Command {DLIST=?}
Response (DLIST#<num>● <elevel>●<code>●
<param>●<occ>)CrLf
...
(DLIST#<num>● <elevel>●<code>●
<param>●<occ>)CrLf
Explanation: There are no errors only standard notices that occur on boot up.
Legend:
Identifier
<num> Line number
NOTICD: Not an error, Initialization information
WARNING: Possible problem without influencing normal
operation
<elevel>
MATTDR: Problem that may lead to further errors
DRROR: Serious error, must report to Lightware support
FATAL: Fatal error, normal operation is not possible
<code> Short name for type of log entry
<param> Technical parameter
<occ> Occurence number for this type of log entry
INFO:
The error list can contain NOTICEs and WARNINGs under normal operation. These entries do not
mean that there is any problem with the matrix!
7.6. System Commands
7.6.1. Restarting the Matrix
Description: The matrix router can be restarted without unplugging power.
Format
Command {RST}
Response (Booting...)CrLf
(<name>●Ready!)CrLf
Explanation: The matrix reboots and sends a message when it is ready.
Legend: <name> is the type of the matrix.
INFO:
The response can be seen only if the connection to the router is still alive.
Example (MX-FR17)
→ {elist=?}
(DLIST#1 Notice BOOT p:2 o:1)CrLf
←
(DLIST#2 Notice SDRIAL p:0 o:1 )CrLf
←
(DLIST#3 Notice CARDINIT p:81 o:1 ) CrLf
←
(DLIST#4 Notice CARDINIT p:2 o:1 )CrLf
←
(DLIST#5 Notice RDADY p:0 o:1)CrLf
←
Explanation
Example
→ {rst}
← (Booting...)CrLf
(MX-FR17 Ready!)CrLf
90