Table of Contents
Advertisement
3 FlexGripper UI
3.1.3 Back-up and Reset System
Continued
Restart and return to the default setting using the restart mode Reset System
Use this procedure to restart the system using the restart mode Reset System:
90
Note
After I-start, the system state will be resumed but any changes done to system
parameters and other settings will be lost. Instead, system parameters and other
settings are read from the originally installed system on delivery. Therefore it is
important to always make a back up before I-start.
1 Make a backup of the system.
2 On the ABB menu, tap Restart. The restart page is displayed.
3 Tap Advanced... to select restart method. The select restart method dialog
is displayed.
4 Tap Reset System, then tap OK.
5 Restore the backup system.
© Copyright 20132019 ABB. All rights reserved.
Product Manual - FlexGripper-Claw
4GAA40401009901-001 Revision: A
Advertisement
Table of Contents
Troubleshooting
