Trouble Shooting; Start-Up Failures - ABB Robotics FlexGripper Product Manual

2 FlexGripper-Claw

2.6.1 Start-up failures

2.6 Trouble shooting

2.6.1 Start-up failures
Consequences
Problems starting the system
Symptoms and causes
Recommended actions
1
2
3
4
70
• LEDs on the sensors do not lit.
• Air hose hangs loosely on the gripper.
Action
Make sure the robot system has started up and correctly is
connected.
Make sure the air source is open.
Make sure the gripper cable and air hose are correctly connec-
ted to the dress cable.
Make sure the gripper cable is correctly connected to the ter-
minal box on the gripper.
© Copyright 20132019 ABB. All rights reserved.
Info/illustration
Product Manual - FlexGripper-Claw
4GAA40401009901-001 Revision: A