1.2.2.2 Safety risks related to tools/workpieces
Safe handling
It must be possible to safely turn off tools, such as milling cutters. Make sure that
guards remain closed until the cutters stop rotating. It should be possible to release
parts manually (valves).
Safe design
FlexGrippers are designed so that they retain workpieces in the event of a power
failure or a disturbance to the controller.
Product Manual - FlexGripper-Claw
4GAA40401009901-001 Revision: A
1.2.2.2 Safety risks related to tools/workpieces
© Copyright 20132019 ABB. All rights reserved.
1 Safety
13