Trouble Shooting - ABB Robotics FlexGripper Product Manual

3 FlexGripper UI

3.3 Trouble shooting

3.3 Trouble shooting
Variable can not be monitored
Description
Possible reason
Solution
The valid scope of variables is:
Task: T_ROB1;
Scope: Global, Task and local
Storage type: Persistent
TCP can not be edited
Description
Possible reason
Solution
The valid scope of TCP is:
Task: T_ROB1;
Scope: Global, Task and local
Storage type: Persistent and Variable
Robot target can not be edited
Description
Possible reason
Solution
The valid scope of robot target is:
Task: T_ROB1;
Scope: Global, Task and local
Storage type: Persistent and Variable
Work object can not be edited
Description
Possible reason
Solution
The valid scope of the work object is:
Task: T_ROB1;
Scope: Global, Task
Continues on next page
108
Can not monitor the variables
• The scope of variable is not correct
• The storage type of variable is not correct
• Make sure the variable and the storage type are correct
Can not edit the TCP
• The scope of the TCP is not correct
• The storage type of the TCP is not correct
• Make sure the scope and the storage type are correct
Can not edit the robot target
• The scope of the robot target is not correct
• The storage type of the robot target is not correct
• Make sure the scope and the storage type are correct
Can not edit the work object
• The scope of the work object is not correct
• The storage type of the robot target is not correct
• Make sure the scope and the storage type are correct
© Copyright 20132019 ABB. All rights reserved.
Product Manual - FlexGripper-Claw
4GAA40401009901-001 Revision: A