1 Safety
1.2.2.1 Safety risks during installation and service work on the FlexGripper
1.2.2 Safety risks
1.2.2.1 Safety risks during installation and service work on the FlexGripper
Overview
This section includes information on general safety risks to be considered when
performing installation and service work on the FlexGripper.
General risks during installation and service
Nation/region specific regulations
To prevent injuries and damage during the installation of the manipulator system,
the regulations applicable in the country concerned and the instructions of ABB
manipulatorics must be complied with.
12
•
The instructions in the Product manual in the section
Commissioning on page 35
•
Emergency stop buttons must be positioned in easily accessible places so
that the manipulator can be stopped quickly.
•
Those in charge of operations must make sure that safety instructions are
available for the installation in question.
•
Those who install the FlexGripper must have the appropriate training for the
manipulator system in question and in any safety matters associated with it.
© Copyright 20132019 ABB. All rights reserved.
must always be followed.
Product Manual - FlexGripper-Claw
4GAA40401009901-001 Revision: A
Installation and