Table of Contents
Advertisement
2.6.8 No Input signal detected
Consequences
Can not run work program.
Symptoms and causes
Recommended actions
1
2
Product Manual - FlexGripper-Claw
4GAA40401009901-001 Revision: A
•
No signal detected in UI. LEDs not lit on the I/O board.
•
Faulty connection.
Action
Make sure the LEDs sensors are lit and all the connections
are firmly connected.
Check the connection on the I/O board.
© Copyright 20132019 ABB. All rights reserved.
2 FlexGripper-Claw
2.6.8 No Input signal detected
Info/illustration
77
Advertisement
Table of Contents
Troubleshooting
