Back-Up And Reset System - ABB Robotics FlexGripper Product Manual

3.1.3 Back-up and Reset System

When do I need to backup the system?
We recommend performing a backup:
Back up the system
This section describes how to back up the system.
1
2
3
Product Manual - FlexGripper-Claw
4GAA40401009901-001 Revision: A
• Before installing new RobotWare.
• Before making any major changes to instructions and/or parameters to make
it possible to return to the previous setting.
• After making any major changes to instructions and/or parameters and testing
the new settings to retain the new successful setting.
Action
Tap the ABB menu and then tap Backup and Restore.
Tap Backup Current System.
A display showing the selected path is shown.
If a default path has been defined, this is shown.
xx0300000441
Note
• By default, a name for the Backup folder is created which can be renamed by
the user later.
• While renaming, ensure that the name does not start with a space.
• If the folder name starts with a space, a warning dialog appears.
Is the displayed backup path the correct one?
If YES: Tap Backup to perform the backup to the selected directory. A backup file
named according to the current date is created.
If NO: Tap ... to the right of the backup path and select directory. Then tap Backup. A
backup folder named according to the current date is created.
© Copyright 20132019 ABB. All rights reserved.
3 FlexGripper UI
3.1.3 Back-up and Reset System
Continues on next page
89