Leds; Table 24: Port Link And Activity Status Leds On The Xem2-4Qs Line Card; Table 25: Link And Activity Status Leds For 10Gbps Breakout Cables - Allied Telesis x950 Series Installation Manual

LEDs

The LED states for transceivers or direct attach cables in ports on the
XEM2-4QS Line Card are described in Table 24.
Table 24. Port Link and Activity Status LEDs on the XEM2-4QS Line Card
Solid Green
Flashing Green
Off
The LED states for breakout cables are described in Table 25.
Table 25. Link and Activity Status LEDs for 10Gbps Breakout Cables
Solid Amber
Flashing Amber
Off
State
The transceiver has established a
40GBase link to a network device.
The transceiver is transmitting or receiving
data.
Possible causes of this state are listed
here:
- The transceiver slot is empty.
- The transceiver has not established a
link to a network device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
State
At least one of the four ports on the
breakout cable has established a 10Gbps
link to a network device.
At least one of the four ports on the
breakout cable is sending or receiving
data.
Possible causes of this state are listed
here:
- The transceiver slot is empty.
- None of the ports on the breakout cable
have established a link to a network
device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
x950 Series Installation Guide for VCStack
Description
Description
67