Figure 91: Steps To Installing The Switch With A Plywood Base - Allied Telesis x950 Series Installation Manual

Chapter 8: Installing the Switch on a Wall
Wall Studs
Wall
152
The recommended minimum dimensions of the plywood base are listed
here:
Width: 58.4 centimeters (23 inches)

Height: 55.9 centimeters (22 inches)

Thickness: 5.1 centimeters (2 inches)

The dimensions assume the wall studs are 41 centimeters (16 inches)
apart. You may need to adjust the width of the base if the distance
between the studs in your wall is different than the industry standard.
You should install the plywood base to the wall and then install the switch
on the base. Refer to Figure 91.
Step 1: Install the
plywood base on
the wall.
Figure 91. Steps to Installing the Switch with a Plywood Base
Plywood
Base
Step 2: Install the
switch on the
plywood base.