Figure 144: Removing The Power Supply - Allied Telesis x950 Series Installation Manual
Advanced layer 3+, alliedware plus v5.5.0-1
Hide thumbs
Also See for x950 Series:
- Installation manual (176 pages) ,
- Installation manual (224 pages) ,
- Installation manual (230 pages)
Table of Contents
Advertisement
4. Press the release lever to the right and pull on the handle to release
the power supply from the internal connector in the switch. Refer to
Figure 144.
Release Lever
Figure 144. Removing the Power Supply
5. Carefully slide the power supply from the switch. Refer to Figure 145
on page 246.
Warning
The power supply is heavy. Use both hands to hold it when
removing it from the switch.
x950 Series Installation Guide for VCStack
245
Advertisement
Table of Contents
