Figure 104: Inserting An Inner Rail Into An Outer Rail; Figure 105: Example Of Positioning The Inner Rail; Figure 106: Measuring For The Extension Brackets - Allied Telesis x950 Series Installation Manual

Figure 104. Inserting an Inner Rail into an Outer Rail
2. Position the inner rail at the planned location for the front panel of
switch in the sliding rack. Refer to Figure 105.
Location of Front
Panel of Switch
Figure 105. Example of Positioning the Inner Rail
3. Measure the distance from the front of the equipment rack to the front
of the inner rail. This will be the approximate length of the extension
brackets. Refer to Figure 106.
Figure 106. Measuring for the Extension Brackets
x950 Series Installation Guide for VCStack
177