Installing Transceivers; Table 38: Transceivers For The Base Transceiver Slots - Allied Telesis x950 Series Installation Manual

Chapter 13: Cabling the Networking Ports

Installing Transceivers

228
Table 38 lists the types of transceivers supported by the base transceiver
slots. Refer to the product data sheet for a list of approved transceivers.
Table 38. Transceivers for the Base Transceiver Slots
Base Ports
Ports 1 to 24 on the
x950-28XSQ switch
Ports 1 to 48 on the
x950-52XSQ switch
Ports 25, 29, 33, and 37
on the x950-28XSQ and
x950-28XTQm switches
Ports 49, 53, 57, and 61
on the x950-52XSQ
switch
Fiber Optic Transceiver
1Gbps SFP or 10Gbps SFP+ transceivers:
- 1Gbps SX/LX SFP transceivers
- 10Gbps SR/LR SFP+ fiber optic
transceivers
- 1/10Gbps SP10T transceiver with RJ-45
connector
- 10Gbps SP10TW direct attach twinax
cables with SFP+ transceiver-style
connectors
- 1/2.5/5/10Gbps SP10TM transceivers with
RJ-45 connectors
100Gbps QSFP28 transceivers:
- QSFP28SR4 transceiver - Maximum
operating distance of 70m (230 ft) or 100m
(328 ft) with 12-strand OM3 or OM4 fiber
optic cable, respectively. Requires a MPO
pluggable optical connector.
- QSFP28LR4 transceiver - Operating range
of 2m (6.6 ft) to 10km (6.2 mi). Requires
single-mode fiber optic cable with a duplex
LC connector.
40Gbps QSFP+ transceivers, direct attach
cables, and breakout cables:
- QSFPSR4 transceiver - requires 12-strand
OM4 fiber optic cable and has a maximum
operating distance of 150m (492 ft).
- QSFPLR4 transceiver - requires single-
mode fiber optic cable and has an operating
range of 2 meters (6.6 ft) to 10km (6.2 mi).