Figure 62: Loosening The Ground Screw; Figure 63: Wrapping The Grounding Wire And Tightening The Screw - Allied Telesis x950 Series Installation Manual

4. Loosen the ground screw with a Phillips-head screwdriver. Refer to
Figure 62.
Figure 62. Loosening the Ground Screw
5. Wind the grounding wire clockwise around the base of the grounding
screw. Refer to Figure 63 on page 125.
Figure 63. Wrapping the Grounding Wire and Tightening the Screw
6. Tighten the ground screw.
7. Connect the other end of the ground wire to a ground point at the
installation site.
8. Go to "Connecting the Grounding Wire" on page 123.
x950 Series Installation Guide for VCStack
125