Installing Fan Modules; Figure 154: Removing The Fan Module From The Shipping Container - Allied Telesis x950 Series Installation Manual

x950 Series Installation Guide for VCStack
Installing Fan
This procedure requires a #2 Phillips-head screwdriver (not provided).
Modules
The illustrations show the installation of a fan module in FAN B slot on the
back panel. The procedure is the same for installing a module in FAN A
slot.
To install a fan module, perform the following procedure:
1. Remove the new fan module form its shipping box. Refer to
Figure 154.
Figure 154. Removing the Fan Module from the Shipping Container
2. Align the fan module in the slot. Refer to Figure 155 on page 254.
253