Optional Feature Licenses - Allied Telesis x950 Series Installation Manual

Optional Feature Licenses

The x950 Switch comes with the AlliedWare Plus management software
and a base set of features that are available as soon as you install the
device. Additional features and capabilities might be included with the
operating system, but can be access only after they are unlocked with
optional feature licenses from Allied Telesis. Contact your authorized
reseller or distributor for a list of optional features licenses for this product.
Here are the guidelines to feature licenses for a stack of x950 Series
switches:
The VCStack feature is part of the base features of the switch. It

does not require an optional feature license.
You can install feature licenses while the switches are operating as

stand-alone units or as a stack.
When ordering feature licenses for the switches of a stack, you

must order one license for each switch.
Switches can form a stack even if they have different feature

licenses. However, the additional features are only available on
those switches with the licenses. The stack generates a warning
message if it detects that the switches do not have the same
optional feature licenses.
x950 Series Installation Guide for VCStack
91