Leds; Figure 4: Link And Activity Leds For Ports 1 To 24 On The X950-28Xtqm Switch; Table 3: Link And Activity Leds For Ports 1 To 24 On The X950-28Xtqm Switch - Allied Telesis x950 Series Installation Manual

Chapter 1: Overview

LEDs

28
This section explains the LEDs for the 100Mbps and 1/2.5/5/10Gbps
twisted pair ports on the x950-28XTQm Switch. Each port has one LED
that displays link and activity information. The LEDs are shown in
Figure 4.
Top Port LED
Figure 4. Link and Activity LEDs for Ports 1 to 24 on the x950-28XTQm
The states of the link and activity LEDs are described in Table 3.
Table 3. Link and Activity LEDs for Ports 1 to 24 on the x950-28XTQm
State
Solid Green
Flashing Green
Solid Amber
Flashing Amber
Off
Bottom Port LED
Switch
Switch
Description
The port has established a 2.5Gbps,
5Gbps, or 10Gbps link to a network
device.
The port is transmitting or receiving data
at 2.5Gbps, 5Gbps or 10Gbps.
The port has established a 100Mbps or
1Gbps link to a network device.
The port is transmitting or receiving data
at 100Mbps or 1Gbps.
Possible causes of this state are listed
here:
- The port has not established a link with
another network device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.