Assembling The Extension Brackets; Figure 107: Removing The Inner Rail; Figure 108: Extension Bracket Parts; Table 31: Extension Bracket Parts - Allied Telesis x950 Series Installation Manual

Chapter 9: Installing the Switch in the RKMT-SL01 Sliding Rack
Assembling the
Extension
Brackets
178
4. Remove the inner rail from the outer rail. Refer to Figure 107.
Figure 107. Removing the Inner Rail
5. Go to "Assembling the Extension Brackets," next.
Now that you know the approximate length for the extension brackets, you
are ready to assemble them. The brackets consist of four parts. Refer to
Table 31 and Figure 108.
Table 31. Extension Bracket Parts
A
Fixed Bracket
B
Long Extension Brackets
C
Short Extension Bracket
Figure 108. Extension Bracket Parts
A - Fixed Bracket
B - Long Extension Bracket
B - Long Extension Bracket
C - Short Extension Bracket
1 ea
2 ea
1 ea