Management Software And Interfaces; Management Methods; Management Panel - Allied Telesis x950 Series Installation Manual

Line cards are ordered separately. Refer to the product data sheet on the
Allied Telesis web site for a list of approved transceivers.
Management
Here are the management software and interfaces:
Software and
Interfaces
The AlliedWare Plus management software comes pre-installed on the
switch.
Management
You can manage the switch as follows:
Methods
Management
The management panel has the following features:
Panel
XEM2-12XS and XEM2-12XS v2 Cards feature 12 ports for 1Gbps

SFP or 10Gbps SFP+ transceivers. Refer to "XEM2-12XS and
XEM2-12XS v2 Line Cards" on page 63.
XEM2-4QS Card features four ports for 40Gbps QSFP+

transceivers. Refer to "XEM2-4QS Line Card" on page 66.
XEM2-1CQ Card features one port for the 100Gbps QSFP28

transceiver. Refer to "XEM2-1CQ Line Card" on page 68.
AlliedWare Plus management software.

Command line interface, available locally through the Console port

or remotely over the network.
Web browser interface available remotely over the network.

Command line interface accessed locally through the Console port

or remotely using Telnet or Secure Shell.
Remote access using the web browser interface and HTTP.

Remote access with SNMPv1, v2c, or v3.

Console RS-232 port for local management (no IP address

required).
USB 2.0 port for storing backup copies of system configuration

files, updating management software, and other management
functions.
An eco-friendly button for turning off the port and system LEDs to

reduce power consumption.
Note
The x950-52XSQ switch does not have the eco-friendly button.
Network management port for initial configuration and

maintenance access to the chassis.
x950 Series Installation Guide for VCStack
23