Figure 27: Example Stacks Of X950-28Xsq Switches With Trunks Of 10Gbps Ports - Allied Telesis x950 Series Installation Manual

Chapter 3: Virtual Chassis Stacking
When possible, try cabling the same trunk ports together. For

example, if you select ports 6 to 9 as trunk ports, cable port 6 on
one switch to port 6 on the next, port 7 to port 7, and so on. Again,
this is not mandatory, but it can make managing or troubleshooting
the stack easier.
Stack of Two Switches
Stack of Three Switches
Stack of Four Switches
Figure 27. Example Stacks of x950-28XSQ Switches with Trunks of
10Gbps Ports
76