Reviewing Safety Precautions - Allied Telesis x950 Series Installation Manual

Chapter 9: Installing the Switch in the RKMT-SL01 Sliding Rack

Reviewing Safety Precautions

168
Review these safety precautions before installing the RKMT-SL01 Kit.
Note
The indicates that a translation of the safety statement is

available in a PDF document titled Translated Safety Statements
posted on the Allied Telesis website at www.alliedtelesis.com/
support.
Warning
Mounting of the equipment in the rack should be such that a
hazardous condition is not created due to uneven mechanical
loading. E25

Warning
Do not pull the rear of the switch out past the front rack posts. If you
need to position the rear of the switch out past the front of the rack,
you should remove it completely from the rack.
Warning
Pull the switch out slowly if you must remove it from the rack for
maintenance. If you pull the switch out past the front of the rack
posts, or if you pull it out too quickly, there is a risk that the weight of
the switch will cause the sliding rail assemblies to fail and cause the
switch to fall out.
Caution
Avoid applying excessive force to the cables.
Caution
If using long extension bracket(s), secure between the fixed bracket
and short extension bracket - the long extension bracket(s) cannot
be attached directly to the inner rail.
E59


E58

E60

E61