Figure 76: Tightening The Two Captive Screws On The Ethernet Line Card - Allied Telesis x950 Series Installation Manual

Figure 76. Tightening the Two Captive Screws on the Ethernet Line Card
7. After installing the power supplies and optional XEM2 Line Card, go to
one of the following chapters:
Chapter 6, "Installing the Switch on a Table" on page 135

Chapter 7, "Installing the Switch in an Equipment Rack" on page

139
Chapter 8, "Installing the Switch on a Wall" on page 147

Chapter 9, "Installing the Switch in the RKMT-SL01 Sliding Rack"

on page 163
x950 Series Installation Guide for VCStack
133